Electrical Installation Sydney: Do you need to have electrical appliances installed in Sydney? We’ve got you covered.

Electrical Installation Sydney

Below we will give you information related to which are the most electrical works done in Sydney and the average cost for each.

How much does an electrician charge in Sydney?

On average an electrician charges between $90 – $130 in Sydney.

What is the call-out fee for electricians in Sydney?

Typically, electricians charge by the hour, but they also have a call-out fee which is the minimum rate they charge to go anywhere to do a job, even if it only takes a few minutes to finish the job. In Sydney, the call-out fee has an average cost of $100.

What is the average cost of some types of electrical installation in Sydney?

Some of the most common services offered by electricians are the installation of lights, ceiling fans, switches, standard powerpoints as well as those that have USB ports, in addition to repairing circuits or wiring.

In any case, the cost of each service varies depending on its complexity. Here are some average prices electricians charge for various electrical work in Sydney:

• Damaged-cable fixing: $105- $135
• Downlight installation: $35- $45
• Fault finding: $90- $110
• Light-switch replacing: $95- $105
• Powerpoint fixing: $50 – $70
• Meter-box repairs: $200- $300

Workforce

Usually an electrician in Sydney charges between $90 – $130 per hour. However, the total number of hours that are used for a particular job will depend on its complexity, materials and equipment necessary for its completion, as explained below.

The complexity of the electrical work

Naturally, the more complex the job, the more man-hours it will require, thus increasing your costs. The electrician you hire can estimate the number of hours your job will require.

Materials and equipment necessary for electrical work

The price of materials, such as cables, switches and others, will depend on the brand and the supplier of the same. Well-known brands usually have the best products, but they are also usually the most expensive. Please contact us if you need a fast free quotation.

What is the cost to renew the wiring of an old house in Sydney?

This will depend on the size and number of rooms that the property has. To give you an idea, renovating the wiring of a five-bedroom home costs about $8,000.

How much does a Sydney-based electrician charge to install a ceiling fan?

The fees of an electrician in Sydney for the installation of a ceiling fan will depend on the type of fan, specifically the number of cables that the fan has, but, on average, these professionals charge between $100 – $150 per fan.

Is it a good idea to buy and install a ceiling fan?

It is, financially speaking. Indeed, these devices consume little energy (the equivalent of a 60-watt bulb) and will cool the area where you install them but not as much as an air conditioner, of course.

Electrical Installation Sydney: Why should you hire an electrician for lighting installation services?

Because these professionals are trained to analyze complete electrical power systems, identify power outage causes, and make complex repairs. In addition, professional electricians have knowledge that goes beyond lighting installation.

On the other hand, electricians must be up-to-date with local and regional codes on the matter. These codes are constantly updated through new regulations to meet emerging technological needs and are intended to ensure that each electrical work is carried out correctly, for the convenience of all parties involved.

Likewise, electricians have tools, meters, and auxiliary supplies that the ordinary citizen does not usually have or know how to use. The factors mentioned above play an important role when it comes to lighting fixtures. Because all types of electrical projects that include the installation of lights involve many risks.

What is the most suitable kind of lighting for a kitchen?

It depends on taste, but among the most recommended are halogen, fluorescent and incandescent lights.

Fluorescent lights come in different shades, have low power consumption and long life.
On the other hand, incandescent lights provide soft yellow light that is often used for downlights or recessed cans.
Finally, halogen lights are great for task lighting because they produce a firm white light.

Please call us on 02 8283 1105 for advice on this and generally on any electrical work in Sydney.

Electrical Installation Sydney: What are some bathroom electrical safety tips?

• Dry your hands and stand on a dry surface before turning on a light switch or electrical appliance.
• Keep all electrical appliances away from children.
• Never use a portable electric heater in the bathroom. A professional electrician can install a permanent heater.
• Don’t use power boards or extension cords in the bathroom either, as these appliances are rarely waterproof.

What are bathroom safety zones?

Australian Standards for the use of electrical appliances in the bathroom establish a division of each bathroom into four zones.

Zone 0

It’s the wet area and includes the shower, the interior bathtub; sockets and switches are not allowed in it. Zone 0 ends where Zone 1 starts.

Zone 1

It’s a vertical distance of 2.5 meters from the foundation of the shower to the ceiling and within 1.2 meters from your fixed shower connection. Includes the tub rim to a height of up to 2.5 meters. Sockets are not allowed in zone 1, and there can only be switches 0.3 meters above the bathroom floor with IPX4 specification.

Zone 2

It is 0.6 meters beyond the zone 1 radius and at a height of 2.25 meters from the ground. No sockets are allowed in this Zone unless they are protected by Residual Current Detectors (RCD) with a fixed rating of less than 30mA, and in a cupboard, or incorporated into a shaver supply unit. On the other hand, switches can be installed in zone 2 if they meet the same requirement of Zone 1: they must be 0.3 meters above the bathroom floor and have IPX4 specification.

Zone 3

It comprises the rest of the bathroom space, which would be at a horizontal radius of 2.4 meters from Zone 2 and, vertically, at 2.5 meters from the ground. This is the only area where sockets are permitted provided that they’re fitted with RCD protection and installed at more than 0.3m above the bathroom floor. This same requirement is enforced for switch installation, but, unlike the other zones, no specific IP rating is required.

Electrical Installation Sydney: Which company should I hire when it comes to electrical installation work in Sydney?

HunterCON Electrical & Air is your best choice if you want the best professionals to undertake any kind of electrical work in and around Sydney. Our electrical services include:

• Powerpoint installation
• Light switch installation
• Dimmer installation
• Lighting installation
• Switchboard installation and upgrades
• Wiring repairs and rewiring
• General electrical repairs
• Ceiling fan installation
• Kitchen lighting
• Wiring for new kitchen appliances
• Garden lighting
• Sensor lighting
• Fault repairs
• Bathroom electrical, including lighting, heating, exhaust fan installation or repair
• TV antenna installation
• Telephone wiring
• Electrical hot water system repairs and replacement
• Emergency lighting
• Smoke alarms

Moreover, we offer you the following:

✔ Fully Licensed Electric & Air Con Specialists with Over 8 Years Experience
✔ Major Credit Cards Accepted
✔ Skye Interest-Free Finance
✔ High Level of Support

Please contact us so we can help you.

Why Choose HunterCON Electrical And Air

There are many reasons why more and more people want to hire HunterCON Electrical and Air’s services. It is not only because we have trained professionals who do their job to perfection, but also because of the rest of the staff who make it all possible and leave smiles on the faces of our valued clients. Indeed, HunterCON Electrical and Air offers you the following:

Electric & Air Con Specialists
Fully licensed Electric & Aircon Specialists
Electric & Air Con Specialists
Single Point of Contact
Electric & Air Con Specialists
Friendly & Helpful Team
Electric & Air Con Specialists
Over 8 Years Experience
Electric & Air Con Specialists
Provision of Services Sydney-Wide
Electric & Air Con Specialists
5-Year Installation Warranty
Electric & Air Con Specialists
High Level of Support
Electric & Air Con Specialists
Interest-Free Financing
Electric & Air Con Specialists
Fast Free Quotes
Read More
huntercon logo layout 1 1
huntercon logo layout 2 1

We pride ourselves on our ability to provide reliable, hands-on service that you can count on, no matter the size of the job. Having a nimble team means that we can offer ongoing support to our clients, and see that you always know who you are talking to.

From consultation to installation to maintenance, attention to detail and customer satisfaction is at the core of the HunterCON ethos. We look forward to working with you!

GET A FREE QUOTE

What Our Clients Are Saying

Read More

5 year

Installation
Warranty

HunterCON electrical and air covers you on parts and labour for 5 years for no extra cost!

Continual, hands-on service is a hallmark of the HunterCON experience, and we strive to ensure all of our customers are satisfied from the first phone call, right through to any ongoing maintenance needs you may require.

5 year Warranty

Annual maintenance

Preventative maintenance

Air con breakdowns

GET A FREE QUOTE

We are fully-licensed full service electrical and air conditioning specialists. No job is too big or too small for us to handle, so get in touch with us today for a FREE quote or call us 02 8283 1105

  • This field is for validation purposes and should be left unchanged.