Ducted Air Conditioning Sydney

These ACs centralise the cooling mechanisms, fans, and motors in a system that is located outside, allowing it to draw fresh air. A series of ducts move the forced cooled air throughout the building.

The addition of zoning can allow for different rooms, or zones, to be cooled differently if needed. A thermostat is used to control the temperature (single or multi-zoned) and other settings including a cooling schedule.

So whether you’re running a busy office, or need to cool your home from hot summer winds in the busy Inner West, there’s a cooling solution for you.

These systems do not have to be one size fits all when it comes to temperature. You can also set up each room differently, provided your AC has the zoning feature.

They’re superior to other systems in how quiet they are when running as well as integration into your existing home design. Most are installed behind the walls with small vents that can be strategically placed. No other air con system can provide the same level of uniform temperature control throughout the house.

Of course, not all ducted systems are a fit for all homes. Smaller or older spaces may make it hard or impossible to install ductwork. It’s also important to note that unless you use zoning, you will consume energy to cool the entire house even if you just want to keep one room cool. These air cons are also the most expensive and labour intensive when it comes to installation.

These air cons can’t be easily purchased off a store shelf. They have to be designed to fit each building with a custom ductwork solution provided by an air conditioner professional. They’ll take into consideration the size of the unit itself to the number of vents you need.

As you plan to have AC installed in your house, there are a few things you’ll have to consider. Some of the most important factors will include your budget, home layout, and long-term needs.

• Cooling Capacity: The capacity of cooling will determine how large a system you will need to buy for your house. They can range anywhere from 10kwh to 27kwh.
• Compliance with MEPS Guidelines: Australia has a set of Minimum Energy Performance Standards (MEPS) that are used by manufacturers to ensure energy efficiency.
• Professional Install: Only choose a provider with licensed and insured air con specialists to ensure that you get the right design and unit for your system.
• Warranties: Look for a system that offers a solid manufacturer’s warranty on the unit itself. However, you’ll want to pair this with a workmanship warranty from an installer to make sure all aspects are covered.
• Maintenance: Most air cons are fairly low maintenance, but you’ll want to invest in a yearly care visit from a professional to help change filters and ensure top-notch efficiency year-round.

Different brands do air con differently, but the top brands will likely cover most of the above factors fairly equally. A professional installer will help narrow the options down based on efficiency, size, and budget requirements.

From there, it’s up to you, and it comes down to features. Here are just a few that stand out to most buyers:

• Number of supported zones
• Reverse cycle capabilities
• Physical size vs. available space
• Thermostats and remotes
• Variable speed compressors
• Smart home connectivity
• Air quality monitoring addons

At HunterCON, we recommend only the best aircon brands for our clients. These are tops when it comes to reliability, warranty, and customer satisfaction

ActronAir

Australia-made Actron is created for efficiency and connection. Control your system from anywhere with smart home integration. With reverse cycle, zoning, and variable fan support, energy smart technology ensures you’ll only use what you need, when you need it, keeping you comfortable while reducing your environmental impact.

Daikin

With over 45 years of history in Australia, Daikin offers options for any home layout. Ducted systems come in premium, bulkhead, and slim line configurations for any installation needs. There are also features for night mode and scheduling.

Samsung ACs

Ready for wide-range cooling that’s no sweat? Samsung’s ducted systems operate in -15°C to 50°C outside temperatures for cooling. Versatile installation options give more flexibility for placement and access for maintenance. The included touch screen controller manages everything from scheduling to filter alerts and temperature sensors.

It usually takes one full day to install a ducted air conditioning. However, the actual time will depend on the complete job. It’s worth noting that installing all new ductwork, such as in a new home build, will add more time to the project for sheet metal fabrication and installation.

Other general factors when installing an air con system include:

• Removing existing air con systems and wiring
• Installing new or repairing existing ductwork
• Installing the new condenser
• Calibrating and programming thermostats
• Accounting for multi-zone temperature regulation

The cost depends entirely on the size of your building. The larger your house, the larger the AC system will need to be. Consequently, the entire installation process will also be longer.

The actual cost of installation will depend on your house’s layout, as well as the material it is made of and the number of people living in it. Either way, on average, you will have to pay approximately $5,000 to install it on a small property, which can go up to around $10,000 for a one-story, three-bedroom home.

Click here for a full breakdown of A/C costs

HunterCON designs and installs custom air con systems. Our specialists advise customers on the best options and brands for their unique needs and provide superior technical service so you’ll get the most out of your system.

All of our work is performed by licensed electrical and air con pros and is backed by a 5-year installation warranty. With HunterCON, your new AC system will be built with efficiency, performance, and comfort in mind.

Call us on 02 8283 1105 to learn more!

Does ducted AC consume a lot of electricity?

If we assume that the electricity consumption rate is 35c per kWh, we can expect an expense of between $1.85 per hour to keep your property warm in winter and $3 per hour to keep it cold in summer. This will vary depending on the energy efficiency of your system and the number of rooms you want to cool or heat.

How long does a ducted system last?

It depends on the unit brand and model, but, on average, the useful life of a well-cared AC system should last 20 years. After this period, its effectiveness is reduced, since its components are susceptible to wear or breakage.

What is the difference between ducted and non-ducted aircons?

Non-Ducted Air Conditioners

• Indoor units need to be placed in every room for individual cooling and heating.
• Each indoor unit operates entirely independently, allowing individual temperature setting.
• Independent control allows you to adjust temperature in different environments for a variety of situations and comfort levels.
• Multiple interior spaces like tenant buildings and offices can adjust temperatures independently by room.

Ducted Air Conditioning

• Air passes through ducts from one central location to cool all rooms.
• All rooms are air conditioned at the same temperature.
• Central control is suited for environments that need to remain constant during the day.
• Ducted systems provide uniform air conditioning in large spaces for both residential and commercial use.

Can you upgrade this type of air con?

While it is possible to upgrade or retrofit compatible ducted systems with smart control technology, there are higher costs than if you had installed iZone from the outset.

Typically, you will need to pay upward of $1000-1500 to upgrade your system as it usually involves the following labour and material costs:

• Discarding the old controller and patching the wall.
• Adding WiFi to a system that may not have WiFi enabled parts.
• Installing extra zones to a system with very few zones in the first place.
• Changing duct layouts to add in additional zones.